UNLOCKING CODE HUAWEI E5172 (MEGAFON R100-1)
Sold 9
Refunds 0
Good feedbacks 3
Bad feedbacks 0
Unlocking the HUAWEI E5172 router (MEGAFON R100-1).
The unlock code (NCK code) allows you to unlock the HUAWEI E5172 router (MEGAFON R100-1)
To work with SIM-cards of any other operators.
******************BEFORE THE PURCHASE********************
1. Make sure you really have a HUAWEI E5172 router (MEGAFON R100-1).
2. Prepare IMEI-phone number. IMEI can be viewed on the router body, or in the program that was opened after installation on the computer. Write it correctly, with no omission.
3. Make sure that there are attempts to enter the code in the router.
**************** UNLOCKING CODE RECEIVING PROCEDURE ****************
After payment for the goods, you must fill out the form, specifying in it the following information:
1. IMEI modem (without errors);
Once again, carefully and without errors fill out the form and press the "Send" button.
**************** DATE OF RECEIVING CODE 5 minutes min - 3 hour slave .DC *********************
Work hours are from 9-00 to 18-00 Moscow time. After this time and on Sunday the code MAY be processed a little longer, but the code will be, be sure.
************** THE HUAWEI E5172 ROUTER UNLOADING PROCESS (MEGAFON R100-1) **************
1. After receiving the NCK unlock code, insert the SIM card of another operator into the modem
(If the PIN on the SIM card is enabled, enter it.)
2. Then the window ("Enter NCK-code") appears and enter the received NCK-code.
3. Alternative input method - go to the web-interface of the router / SIM card lock.
*****************ATTENTION!!!********************
Before making a purchase, it is highly recommended to check if the router asks for the unlock code when a SIM card of another operator is installed in it.
When making a purchase you agree that the model of your HUAWEI E5172 router (MEGAFON R100-1), as well as attempts to enter the unlock code, are not used up to zero.
If after the purchase of the code it turns out that attempts to enter the unlock code did not stop, you made a mistake in choosing a model or entered the wrong IMEI-means can not be refunded!
The code is guaranteed on the "factory" firmware, that is, you need to flash and patch the dashboards after unlocking.
The unlock code (NCK code) allows you to unlock the HUAWEI E5172 router (MEGAFON R100-1)
To work with SIM-cards of any other operators.
******************BEFORE THE PURCHASE********************
1. Make sure you really have a HUAWEI E5172 router (MEGAFON R100-1).
2. Prepare IMEI-phone number. IMEI can be viewed on the router body, or in the program that was opened after installation on the computer. Write it correctly, with no omission.
3. Make sure that there are attempts to enter the code in the router.
**************** UNLOCKING CODE RECEIVING PROCEDURE ****************
After payment for the goods, you must fill out the form, specifying in it the following information:
1. IMEI modem (without errors);
Once again, carefully and without errors fill out the form and press the "Send" button.
**************** DATE OF RECEIVING CODE 5 minutes min - 3 hour slave .DC *********************
Work hours are from 9-00 to 18-00 Moscow time. After this time and on Sunday the code MAY be processed a little longer, but the code will be, be sure.
************** THE HUAWEI E5172 ROUTER UNLOADING PROCESS (MEGAFON R100-1) **************
1. After receiving the NCK unlock code, insert the SIM card of another operator into the modem
(If the PIN on the SIM card is enabled, enter it.)
2. Then the window ("Enter NCK-code") appears and enter the received NCK-code.
3. Alternative input method - go to the web-interface of the router / SIM card lock.
*****************ATTENTION!!!********************
Before making a purchase, it is highly recommended to check if the router asks for the unlock code when a SIM card of another operator is installed in it.
When making a purchase you agree that the model of your HUAWEI E5172 router (MEGAFON R100-1), as well as attempts to enter the unlock code, are not used up to zero.
If after the purchase of the code it turns out that attempts to enter the unlock code did not stop, you made a mistake in choosing a model or entered the wrong IMEI-means can not be refunded!
The code is guaranteed on the "factory" firmware, that is, you need to flash and patch the dashboards after unlocking.
Immediately after payment you will receive a form to fill in the registration data, in which you will have to fill out the following fields:
- The e-mail address (email);
- Enter IMEI;
These data will be transferred to the seller to complete the purchase and sale of the goods.
- The e-mail address (email);
- Enter IMEI;
These data will be transferred to the seller to complete the purchase and sale of the goods.