EPSON Adjustment Program Reset L382-L386-L486-L3050
Sold 1
Refunds 0
Good feedbacks 0
Bad feedbacks 0
Reset the Absorbent Adjustment Program of the EPSON L382-L386-L486-L3050
Instructions for resetting the "diaper" using the Adjustment Program Reset Epson L series reset the diaper, ink counter
1.Run the program by double-clicking on the file Adjprog.exe
2.If a window with error codes pops up when opening
3.Then you need to open the program without unpacking from the archive, or open the archive (rar) using the browser, it will offer to save the file, save and open through the browser menu until Adjprog.exe . Or you can also open it via a virtual machine. Usually the problem occurs on Windows 7.
4.After opening in the program window that appears, click the Select button
5.In the Model Name field, select your printer model, in our case it is Epson L222.
6.Also be sure to select the port to which your printer is connected (for example, Auto selection). Click OK and go back to the previous window.
7.Enter the service mode by clicking on the button PARTICULAR ADJUSTMENT MODE
8.Find the item Waste ink pad counter and click on it with the mouse twice
9.Press the Check button to see which counter is how full, and which counter needs to be reset
10.In our case, the Main pad counter is full, to reset it, put a tick next to it and click the Initialize button, we will reset both counters. Please pay attention to this point: if there are unprinted tasks in the print queue, then the program may hang, so do not forget to clear the print queue, in some cases, it is worth restarting the computer
11.In the next window, a notification will appear "After clicking on the "OK" button, the counters will be reset", so click the "OK" button
12.Next, a notification will appear about the need to turn off the printer with the On button.\Off. therefore, turn off the printer and turn it on again:
13.After turning on your printer, the error "Maintenance required. Contact the service center." will not appear, the "Drop" and "Paper" indicators will stop flashing, and you will be able to continue your work, all this provided that you clearly followed the recommendations in this entry. Have a nice typing!
1.Run the program by double-clicking on the file Adjprog.exe
2.If a window with error codes pops up when opening
3.Then you need to open the program without unpacking from the archive, or open the archive (rar) using the browser, it will offer to save the file, save and open through the browser menu until Adjprog.exe . Or you can also open it via a virtual machine. Usually the problem occurs on Windows 7.
4.After opening in the program window that appears, click the Select button
5.In the Model Name field, select your printer model, in our case it is Epson L222.
6.Also be sure to select the port to which your printer is connected (for example, Auto selection). Click OK and go back to the previous window.
7.Enter the service mode by clicking on the button PARTICULAR ADJUSTMENT MODE
8.Find the item Waste ink pad counter and click on it with the mouse twice
9.Press the Check button to see which counter is how full, and which counter needs to be reset
10.In our case, the Main pad counter is full, to reset it, put a tick next to it and click the Initialize button, we will reset both counters. Please pay attention to this point: if there are unprinted tasks in the print queue, then the program may hang, so do not forget to clear the print queue, in some cases, it is worth restarting the computer
11.In the next window, a notification will appear "After clicking on the "OK" button, the counters will be reset", so click the "OK" button
12.Next, a notification will appear about the need to turn off the printer with the On button.\Off. therefore, turn off the printer and turn it on again:
13.After turning on your printer, the error "Maintenance required. Contact the service center." will not appear, the "Drop" and "Paper" indicators will stop flashing, and you will be able to continue your work, all this provided that you clearly followed the recommendations in this entry. Have a nice typing!